ANNUAL SERVICE AGREEMENT
AIR CONDITIONING
- Check Drain Lines
- Check Evaporator Coil
- Check and flush condensate drains (must have cleanout Tee – extra task to install)
- Flush condensate pan
- Clean and flush condensate pump if applicable
- Check aux pan for cracks or bad seals
- Do visual check of ductwork for leaks or deterioration
- Wash O/D coil if needed (extensive cleaning extra)
- Tighten electrical connections
- Check incoming voltage
- Check amp draw of compressor
- Check amp draw of indoor fan motor
- Check amp draw of outdoor fan motor
- Check for loose or frayed wires
- Inspect contactor points
- Inspect capacitors for leakage
- Take sensor reading if applicable
- Check charge (Freon)
- Air duct cleaning
GAS HEAT INSPECTION
- Inspect thermocouple and pilot safety
- Check heat exchanger and burner assembly
- Check gas valve operation
- Test and adjust gas pressure regulator
- Inspect wiring on furnace
- Inspect high limit control
- Check fan control
- Inspect flue pipe and roof jack
- Check for combustible materials near furnace
- Clean and inspect thermostat for proper calibration
- Check return air chases, ducts and filters
- Inspect indoor blower motor and squirrel cage for cleanliness, lubricate motor, check belt tension, condition and alignment
- Inspect accessible ductwork for air leaks
ELECTRIC HEAT INSPECTION
- Check voltage and breakers
- Check high limit control and fusible links
- Check heating elements with amp meter for current draw
- Check sequence control for proper operation
- Check electrical connections
- Clean and inspect thermostat for proper calibration
- Check return air changes, ducts and air filters
- Inspect indoor blower motor and squirrel cage for cleanliness, lubricate motor, clean belt tension, condition and alignment
- Inspect accessible ductwork for air leaks
HEAT PUMPS
- A combination of A/C and electric heat inspecting at same price as full system
DRAIN LINES
- Kingwood Air Repair is not responsible for faulty drain systems. Homeowner has been made aware of the problem and declined repair